Composite StructuresLaajuus (3 cr)
Code: RAK2J4
Objective
Competence in the construction process
The student knows different composite structures and where they are typically used. The student also understands the function of composite structures.
Competence in structural engineering
The student will be competent in designing reinforced concrete composite structures according to the Eurocodes.
Content
- Designing bent reinforced concrete composite structures (beams and plates) in ultimate and serviceability limit states according to the Eurocodes
- Designing composite columns according to the Eurocodes
Qualifications
Concrete Structures 1, Steel Structures 1.
Assessment criteria, satisfactory (1)
The student is able to use the Eurocode of composite structures in the design of a simple bent structure.
Assessment criteria, good (3)
The student is able to use the Eurocode of composite structures in the design of different bar structures, such as a bar and a pillar .
Assessment criteria, excellent (5)
The student is able to use the Eurocode of composite structures very well in the design of different bar structures, such as a bar and a pillar .
Materials
Eurocodes pertaining to composite structures and corresponding national annexes.
Liittorakenteiden suunnittelu- ja mitoitus Eurocode 4 -oppikirja BY 58, Suomen betoniyhdistys ry, Teräsrakenneyhdistys ry.
Lecturer's material.
Enrollment
22.04.2024 - 04.09.2024
Timing
07.01.2025 - 21.02.2025
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Construction Engineering
Teachers
- Martti Perälä
Scheduling groups
- Avoin AMK (Ei koske tutkinto-opiskelijaa) (Size: 5. Open UAS: 5.)
Student groups
-
RAK21SUInsinööri (AMK), Rakennustekniikka
Education groups
- Open UAS (Doesn't apply to degree student)
Objective
Competence in the construction process
The student knows different composite structures and where they are typically used. The student also understands the function of composite structures.
Competence in structural engineering
The student will be competent in designing reinforced concrete composite structures according to the Eurocodes.
Content
- Designing bent reinforced concrete composite structures (beams and plates) in ultimate and serviceability limit states according to the Eurocodes
- Designing composite columns according to the Eurocodes
Materials
Eurocodes EN 1994, EN 1992 and EN 1993. Liittorakenteiden suunnittelu ja mitoitus, Eurocode 4 –oppikirja by58. Lecturer's own material.
Teaching methods
Lectures and calculation exercises. Contact lessons.
Student workload
Total work load of the course: 80 h.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student is able to use the Eurocode of composite structures in the design of a simple bent structure.
Assessment criteria, good (3)
The student is able to use the Eurocode of composite structures in the design of different bar structures, such as a bar and a pillar .
Assessment criteria, excellent (5)
The student is able to use the Eurocode of composite structures very well in the design of different bar structures, such as a bar and a pillar .
Assessment methods and criteria
Final exam.
Assessment criteria, good (3)
The student is able to use the Eurocode of composite structures in the design of a simple bent structure.
Assessment criteria, excellent (5)
The student is able to use the Eurocode of composite structures in the design of different bar structures, such as a bar and a pillar .
Assessment criteria, approved/failed
The student is able to use the Eurocode of composite structures very well in the design of different bar structures, such as a bar and a pillar .
Qualifications
Concrete Structures 1, Steel Structures 1.
Enrollment
17.04.2023 - 11.10.2023
Timing
27.11.2023 - 11.02.2024
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Construction Engineering
Teachers
- Martti Perälä
Student groups
-
RAK20SU
-
MRAK20SUDegree Programme in Construction Engineering
Objective
Competence in the construction process
The student knows different composite structures and where they are typically used. The student also understands the function of composite structures.
Competence in structural engineering
The student will be competent in designing reinforced concrete composite structures according to the Eurocodes.
Content
- Designing bent reinforced concrete composite structures (beams and plates) in ultimate and serviceability limit states according to the Eurocodes
- Designing composite columns according to the Eurocodes
Materials
Eurocodes pertaining to composite structures and corresponding national annexes.
Liittorakenteiden suunnittelu- ja mitoitus Eurocode 4 -oppikirja BY 58, Suomen betoniyhdistys ry, Teräsrakenneyhdistys ry.
Lecturer's material.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student is able to use the Eurocode of composite structures in the design of a simple bent structure.
Assessment criteria, good (3)
The student is able to use the Eurocode of composite structures in the design of different bar structures, such as a bar and a pillar .
Assessment criteria, excellent (5)
The student is able to use the Eurocode of composite structures very well in the design of different bar structures, such as a bar and a pillar .
Qualifications
Concrete Structures 1, Steel Structures 1.
Enrollment
14.11.2022 - 15.01.2023
Timing
09.01.2023 - 26.02.2023
Credits
3 op
Virtual proportion (cr)
1 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Construction Engineering
Teachers
- Martti Perälä
Student groups
-
RAK19SU
Objective
Competence in the construction process
The student knows different composite structures and where they are typically used. The student also understands the function of composite structures.
Competence in structural engineering
The student will be competent in designing reinforced concrete composite structures according to the Eurocodes.
Content
- Designing bent reinforced concrete composite structures (beams and plates) in ultimate and serviceability limit states according to the Eurocodes
- Designing composite columns according to the Eurocodes
Materials
Eurocodes EN 1994, EN 1992 and EN 1993. Liittorakenteiden suunnittelu ja mitoitus, Eurocode 4 –oppikirja by58. Lecturer's own material.
Teaching methods
Lectures and calculation exercises.
Student workload
Total work load of the course: 80 h
- of which scheduled studies: 40 h
- of which autonomous studies: 40 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student is able to use the Eurocode of composite structures in the design of a simple bent structure.
Assessment criteria, good (3)
The student is able to use the Eurocode of composite structures in the design of different bar structures, such as a bar and a pillar .
Assessment criteria, excellent (5)
The student is able to use the Eurocode of composite structures very well in the design of different bar structures, such as a bar and a pillar .
Assessment methods and criteria
Assessment 0-5.
Qualifications
Concrete Structures 1, Steel Structures 1.
Enrollment
03.12.2021 - 23.01.2022
Timing
10.01.2022 - 27.02.2022
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Construction Engineering
Teachers
- Martti Perälä
Student groups
-
RAK18SU
Objective
Competence in the construction process
The student knows different composite structures and where they are typically used. The student also understands the function of composite structures.
Competence in structural engineering
The student will be competent in designing reinforced concrete composite structures according to the Eurocodes.
Content
- Designing bent reinforced concrete composite structures (beams and plates) in ultimate and serviceability limit states according to the Eurocodes
- Designing composite columns according to the Eurocodes
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student is able to use the Eurocode of composite structures in the design of a simple bent structure.
Assessment criteria, good (3)
The student is able to use the Eurocode of composite structures in the design of different bar structures, such as a bar and a pillar .
Assessment criteria, excellent (5)
The student is able to use the Eurocode of composite structures very well in the design of different bar structures, such as a bar and a pillar .
Qualifications
Concrete Structures 1, Steel Structures 1.