Study Guide

Objective

Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.

Content

Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system

Location and time

Lecture material, Lecture demonstrations, Assignments, EPLAN software.

Teaching methods

Lectures, Demonstrations, Assignments.

Student workload

Contact teaching about 35 h. Self-learning and assignments about 70h.

Evaluation scale

1-5

Assessment criteria, satisfactory (1)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .

Assessment criteria, good (3)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .

Assessment criteria, excellent (5)

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .

Assessment methods and criteria

Assignment evaluation.

Assessment criteria, good (3)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system.

Assessment criteria, excellent (5)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system.

Assessment criteria, approved/failed

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system.

Qualifications

No previous studies are required.

Further information

The issues of automation technology are internationally similar.

Objective

Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.

Content

Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system

Location and time

Lecture material, Lecture demonstrations, Assignments, EPLAN software.

Teaching methods

Lectures, Demonstrations, Assignments.

Student workload

Contact teaching about 35 h. Self-learning and assignments about 70h.

Evaluation scale

1-5

Assessment criteria, satisfactory (1)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .

Assessment criteria, good (3)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .

Assessment criteria, excellent (5)

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .

Assessment methods and criteria

Assignment evaluation.

Assessment criteria, good (3)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system.

Assessment criteria, excellent (5)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system.

Assessment criteria, approved/failed

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system.

Qualifications

No previous studies are required.

Further information

The issues of automation technology are internationally similar.

Objective

Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.

Content

Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system

Location and time

Lecture material, Lecture demonstrations, Assignments, EPLAN software.

Teaching methods

Lectures, Demonstrations, Assignments.

Student workload

Contact teaching about 35 h. Self-learning and assignments about 70h.

Evaluation scale

1-5

Assessment criteria, satisfactory (1)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .

Assessment criteria, good (3)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .

Assessment criteria, excellent (5)

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .

Assessment methods and criteria

Assignment evaluation.

Assessment criteria, good (3)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system.

Assessment criteria, excellent (5)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system.

Assessment criteria, approved/failed

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system.

Qualifications

No previous studies are required.

Further information

The issues of automation technology are internationally similar.

Objective

Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.

Content

Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system

Location and time

Lecture material, Lecture demonstrations, Assignments, EPLAN software.

Teaching methods

Lectures, Demonstrations, Assignments.

Student workload

Contact teaching about 35 h. Self-learning and assignments about 70h.

Evaluation scale

1-5

Assessment criteria, satisfactory (1)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .

Assessment criteria, good (3)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .

Assessment criteria, excellent (5)

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .

Assessment methods and criteria

Assignment evaluation.

Qualifications

No previous studies are required.

Further information

The issues of automation technology are internationally similar.

Objective

Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.

Content

Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system

Location and time

Lecture material, Lecture demonstrations, Assignments, EPLAN software.

Teaching methods

Lectures, Demonstrations, Assignments.

Student workload

Contact teaching about 35 h. Self-learning and assignments about 70h.

Evaluation scale

1-5

Assessment criteria, satisfactory (1)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .

Assessment criteria, good (3)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .

Assessment criteria, excellent (5)

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .

Assessment methods and criteria

Assignment evaluation.

Qualifications

No previous studies are required.

Further information

The issues of automation technology are internationally similar.

Objective

Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.

Content

Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system

Materials

Lecture material, Lecture demonstrations, Assignments, CADS programs.

Teaching methods

Lectures, Demonstrations, Assignment

Evaluation scale

1-5

Assessment criteria, satisfactory (1)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .

Assessment criteria, good (3)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .

Assessment criteria, excellent (5)

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .

Assessment methods and criteria

Assignments

Qualifications

No previous studies are required.

Further information

The issues of automation technology are internationally similar.

Objective

Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.

Content

Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system

Evaluation scale

1-5

Assessment criteria, satisfactory (1)

The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .

Assessment criteria, good (3)

The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .

Assessment criteria, excellent (5)

The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .

Qualifications

No previous studies are required.

Further information

The issues of automation technology are internationally similar.