Laboratory Assignments in ElectronicsLaajuus (3 op)
Tunnus: AE00CM82
Osaamistavoitteet
Upon completion of the course, students will be able to use measuring devices and software. Students will apply measuring devices and sensors, handle and verify collected signals. They will be able to develop and design various measuring equipment and methods.
Sisältö
- Various sensor circuits: temperature, moisture, light, force, etc.
- Signal amplifiers
- Measuring methods
- Sensor module connections
- Analyzing measurements
- Post-processing with an appropriate software
Esitietovaatimukset
Basics of electronics
Arviointikriteerit, tyydyttävä (1)
The student will do the job of the course assignments successfully. Laboratory work is documented. The student is very sufficiently familiar with subjects.
Arviointikriteerit, hyvä (3)
The student will do the job of the course assignments well. Laboratory work is well documented. The student is very familiar with subjects.
Arviointikriteerit, kiitettävä (5)
The student will do the job of the course assignments perfectly. The student is very well familiar with subjects. Laboratory work is
excellent documented. Independently studies the operation of the components
Ilmoittautumisaika
11.11.2024 - 19.02.2025
Ajoitus
03.03.2025 - 27.04.2025
Laajuus
3 op
Yksikkö
SeAMK Automaatio- ja tietotekniikka
Toimipiste
SeAMK Seinäjoki, Frami
Opetuskielet
- Englanti
Tutkinto-ohjelma
- Bachelor of Engineering, Automation Engineering
Opettaja
- Marko Hietamäki
Opiskelijaryhmät
-
AE23Bachelor of Engineering, Automation Engineering
Tavoitteet
Upon completion of the course, students will be able to use measuring devices and software. Students will apply measuring devices and sensors, handle and verify collected signals. They will be able to develop and design various measuring equipment and methods.
Sisältö
- Various sensor circuits: temperature, moisture, light, force, etc.
- Signal amplifiers
- Measuring methods
- Sensor module connections
- Analyzing measurements
- Post-processing with an appropriate software
Oppimateriaalit
Elektroniikan internet lähteet
Opetusmenetelmät
Luennot ja harjoitukset
Arviointiasteikko
1-5
Arviointikriteerit, tyydyttävä (1)
The student will do the job of the course assignments successfully. Laboratory work is documented. The student is very sufficiently familiar with subjects.
Arviointikriteerit, hyvä (3)
The student will do the job of the course assignments well. Laboratory work is well documented. The student is very familiar with subjects.
Arviointikriteerit, kiitettävä (5)
The student will do the job of the course assignments perfectly. The student is very well familiar with subjects. Laboratory work is
excellent documented. Independently studies the operation of the components
Arviointimenetelmät ja arvioinnin perusteet
Tentti ja harjoitustehtävät
Esitietovaatimukset
Basics of electronics
Ilmoittautumisaika
11.11.2024 - 15.01.2025
Ajoitus
07.01.2025 - 23.02.2025
Laajuus
3 op
Yksikkö
SeAMK Automaatio- ja tietotekniikka
Toimipiste
SeAMK Seinäjoki, Frami
Opetuskielet
- Englanti
Tutkinto-ohjelma
- Bachelor of Engineering, Automation Engineering
Opettaja
- Marko Hietamäki
Opiskelijaryhmät
-
TITE22Insinööri (AMK), Tietotekniikka
Tavoitteet
Upon completion of the course, students will be able to use measuring devices and software. Students will apply measuring devices and sensors, handle and verify collected signals. They will be able to develop and design various measuring equipment and methods.
Sisältö
- Various sensor circuits: temperature, moisture, light, force, etc.
- Signal amplifiers
- Measuring methods
- Sensor module connections
- Analyzing measurements
- Post-processing with an appropriate software
Oppimateriaalit
Elektroniikan internet lähteet
Opetusmenetelmät
Luennot ja harjoitukset
Arviointiasteikko
1-5
Arviointikriteerit, tyydyttävä (1)
The student will do the job of the course assignments successfully. Laboratory work is documented. The student is very sufficiently familiar with subjects.
Arviointikriteerit, hyvä (3)
The student will do the job of the course assignments well. Laboratory work is well documented. The student is very familiar with subjects.
Arviointikriteerit, kiitettävä (5)
The student will do the job of the course assignments perfectly. The student is very well familiar with subjects. Laboratory work is
excellent documented. Independently studies the operation of the components
Arviointimenetelmät ja arvioinnin perusteet
Tentti ja harjoitustehtävät
Esitietovaatimukset
Basics of electronics
Ilmoittautumisaika
13.11.2023 - 21.02.2024
Ajoitus
04.03.2024 - 28.04.2024
Laajuus
3 op
Yksikkö
SeAMK Automaatio- ja tietotekniikka
Toimipiste
SeAMK Seinäjoki, Frami
Opetuskielet
- Englanti
Tutkinto-ohjelma
- Bachelor of Engineering, Automation Engineering
Opettaja
- Marko Hietamäki
Opiskelijaryhmät
-
AE22Bachelor of Engineering, Automation Engineering
Tavoitteet
Upon completion of the course, students will be able to use measuring devices and software. Students will apply measuring devices and sensors, handle and verify collected signals. They will be able to develop and design various measuring equipment and methods.
Sisältö
- Various sensor circuits: temperature, moisture, light, force, etc.
- Signal amplifiers
- Measuring methods
- Sensor module connections
- Analyzing measurements
- Post-processing with an appropriate software
Arviointiasteikko
1-5
Arviointikriteerit, tyydyttävä (1)
The student will do the job of the course assignments successfully. Laboratory work is documented. The student is very sufficiently familiar with subjects.
Arviointikriteerit, hyvä (3)
The student will do the job of the course assignments well. Laboratory work is well documented. The student is very familiar with subjects.
Arviointikriteerit, kiitettävä (5)
The student will do the job of the course assignments perfectly. The student is very well familiar with subjects. Laboratory work is
excellent documented. Independently studies the operation of the components
Esitietovaatimukset
Basics of electronics
Ilmoittautumisaika
13.11.2023 - 17.01.2024
Ajoitus
08.01.2024 - 25.02.2024
Laajuus
3 op
Yksikkö
SeAMK Automaatio- ja tietotekniikka
Toimipiste
SeAMK Seinäjoki, Frami
Opetuskielet
- Englanti
Tutkinto-ohjelma
- Professional Studies in Technology
- Insinööri (AMK), Tietotekniikka
Opettaja
- Marko Hietamäki
Opiskelijaryhmät
-
IEPIP23International Professional Studies
-
TITE21Insinööri (AMK), Tietotekniikka
Tavoitteet
Upon completion of the course, students will be able to use measuring devices and software. Students will apply measuring devices and sensors, handle and verify collected signals. They will be able to develop and design various measuring equipment and methods.
Sisältö
- Various sensor circuits: temperature, moisture, light, force, etc.
- Signal amplifiers
- Measuring methods
- Sensor module connections
- Analyzing measurements
- Post-processing with an appropriate software
Arviointiasteikko
1-5
Arviointikriteerit, tyydyttävä (1)
The student will do the job of the course assignments successfully. Laboratory work is documented. The student is very sufficiently familiar with subjects.
Arviointikriteerit, hyvä (3)
The student will do the job of the course assignments well. Laboratory work is well documented. The student is very familiar with subjects.
Arviointikriteerit, kiitettävä (5)
The student will do the job of the course assignments perfectly. The student is very well familiar with subjects. Laboratory work is
excellent documented. Independently studies the operation of the components
Esitietovaatimukset
Basics of electronics