Mechanical Drawing and CADLaajuus (5 op)
Tunnus: KCMECHCAD
Osaamistavoitteet
Students will learn to create 3D part models, sheet metal models, sub-assembly and assembly models. They will also learn to create assembly and component drawings by using CAD software. They will also learn basic knowledge of the theory of technical drawing and understand the symbols used in mechanical drawing. Consideration of sustainable development and recyclability in design
Sisältö
- Theory of technical drawing
- 3D modelling and general theory of modelling systems
- 3D modelling of products and assembly models
- Drawing planes and sheet metal designing
- Diagrams and their standardized symbols
- International standards for technical drawing
Students will do exercises using the Solid Edge 3D CAD programme.
Arviointikriteerit, tyydyttävä (1)
Students are familiar with the standard machine drawing symbols and be able to model 3D workpieces.
Arviointikriteerit, hyvä (3)
Students are able to model the 3D workpieces, create drawings and small assemblies.
Arviointikriteerit, kiitettävä (5)
Students can do a demanding product design.
Ilmoittautumisaika
17.04.2023 - 06.09.2023
Ajoitus
28.08.2023 - 17.12.2023
Laajuus
5 op
Yksikkö
SeAMK Automaatio- ja tietotekniikka
Toimipiste
SeAMK Seinäjoki, Frami
Opetuskielet
- Englanti
Tutkinto-ohjelma
- Professional Studies in Technology
- Insinööri (AMK), Automaatiotekniikka
Opettaja
- Jorma Mettälä
Opiskelijaryhmät
-
AUTE22KAInsinööri (AMK), Automaatiotekniikka, Päivätoteutus
-
IEPIP23International Professional Studies
Tavoitteet
Students will learn to create 3D part models, sheet metal models, sub-assembly and assembly models. They will also learn to create assembly and component drawings by using CAD software. They will also learn basic knowledge of the theory of technical drawing and understand the symbols used in mechanical drawing. Consideration of sustainable development and recyclability in design
Sisältö
- Theory of technical drawing
- 3D modelling and general theory of modelling systems
- 3D modelling of products and assembly models
- Drawing planes and sheet metal designing
- Diagrams and their standardized symbols
- International standards for technical drawing
Students will do exercises using the Solid Edge 3D CAD programme.
Oppimateriaalit
Recommended or Required Reading
Hand-outs and the following literature as assigned by the lecturer:
Cesil Jensen et al. 2008. Engineering Drawing & Design, Seventh Edition, McGraW-Hill International Edition, ISBN 978-0-07-128420-2
- Laakko T. et al. 1998. Tuotteen 3D-CAD-suunnittelu. WSOY: Helsinki. pp. 312.
- Hietikko E. 1996. Tietokoneavusteinen tuotesuunnittelu. Otatieto Oy Kirjasarja 567: Helsinki. pp. 238.
- Autio A. & Hasari H. 1999. Koneenpiirustus ammattikorkeakouluille ja teknillisille oppilaitoksille. Otava: Keuruu. pp. 290.
Opetusmenetelmät
Mode of Delivery / Planned Learning Activities and Teaching Methods
- Lectures
- Supervised computer work
- Assignments
Opiskelijan ajankäyttö ja kuormitus
Student's Workload
49h lectures, exercises
49h assignments, preparing for exams
Arviointiasteikko
1-5
Arviointikriteerit, tyydyttävä (1)
Students are familiar with the standard machine drawing symbols and be able to model 3D workpieces.
Arviointikriteerit, hyvä (3)
Students are able to model the 3D workpieces, create drawings and small assemblies.
Arviointikriteerit, kiitettävä (5)
Students can do a demanding product design.
Arviointimenetelmät ja arvioinnin perusteet
Assessment Methods
Assignments and an examination
Arviointikriteerit, tyydyttävä (1-2)
Student can model a basic workpiece and make a technical drawing for it.
Arviointikriteerit, hyvä (3-4)
Student can model a basic workpiece and make a good technical drawing for it. In addition, student can make an assembly drawing and parts list.
Arviointikriteerit, kiitettävä (5)
Student can utilize cad system very versatile. Student can model a basic workpiece and make a good technical drawing for it. In addition, student can make an assembly drawing and parts list, exploded views and sheet metal models.
Ilmoittautumisaika
16.04.2022 - 07.09.2022
Ajoitus
29.08.2022 - 18.12.2022
Laajuus
5 op
Virtuaaliosuus (op)
1 op
T&K-osuus
1 op
Yksikkö
SeAMK Opintoasiainpalvelut
Toimipiste
SeAMK Seinäjoki, Frami
Opetuskielet
- Englanti
Tutkinto-ohjelma
- Professional Studies in Technology
- Insinööri (AMK), Automaatiotekniikka
Opettaja
- Jorma Mettälä
Opiskelijaryhmät
-
IEPIP22International Professional Studies
-
AUTE21KAInsinööri (AMK), Automaatiotekniikka
Tavoitteet
Students will learn to create 3D part models, sheet metal models, sub-assembly and assembly models. They will also learn to create assembly and component drawings by using CAD software. They will also learn basic knowledge of the theory of technical drawing and understand the symbols used in mechanical drawing. Consideration of sustainable development and recyclability in design
Sisältö
- Theory of technical drawing
- 3D modelling and general theory of modelling systems
- 3D modelling of products and assembly models
- Drawing planes and sheet metal designing
- Diagrams and their standardized symbols
- International standards for technical drawing
Students will do exercises using the Solid Edge 3D CAD programme.
Oppimateriaalit
Recommended or Required Reading
Hand-outs and the following literature as assigned by the lecturer:
Cesil Jensen et al. 2008. Engineering Drawing & Design, Seventh Edition, McGraW-Hill International Edition, ISBN 978-0-07-128420-2
- Laakko T. et al. 1998. Tuotteen 3D-CAD-suunnittelu. WSOY: Helsinki. pp. 312.
- Hietikko E. 1996. Tietokoneavusteinen tuotesuunnittelu. Otatieto Oy Kirjasarja 567: Helsinki. pp. 238.
- Autio A. & Hasari H. 1999. Koneenpiirustus ammattikorkeakouluille ja teknillisille oppilaitoksille. Otava: Keuruu. pp. 290.
Opetusmenetelmät
Mode of Delivery / Planned Learning Activities and Teaching Methods
- Lectures
- Supervised computer work
- Assignments
Opiskelijan ajankäyttö ja kuormitus
Student's Workload
49h lectures, exercises
49h assignments, preparing for exams
Arviointiasteikko
1-5
Arviointikriteerit, tyydyttävä (1)
Students are familiar with the standard machine drawing symbols and be able to model 3D workpieces.
Arviointikriteerit, hyvä (3)
Students are able to model the 3D workpieces, create drawings and small assemblies.
Arviointikriteerit, kiitettävä (5)
Students can do a demanding product design.
Arviointimenetelmät ja arvioinnin perusteet
Assessment Methods
Assignments and an examination
Arviointikriteerit, tyydyttävä (1-2)
Student can model a basic workpiece and make a technical drawing for it.
Arviointikriteerit, hyvä (3-4)
Student can model a basic workpiece and make a good technical drawing for it. In addition, student can make an assembly drawing and parts list.
Arviointikriteerit, kiitettävä (5)
Student can utilize cad system very versatile. Student can model a basic workpiece and make a good technical drawing for it. In addition, student can make an assembly drawing and parts list, exploded views and sheet metal models.