Design of Electrical and Automation SystemLaajuus (4 cr)
Code: KL25AB90300
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Qualifications
No previous studies are required.
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Materials
Lecture material, Lecture demonstrations, Assignments, CADS programs.
Further information
The issues of automation technology are internationally similar.
Enrollment
13.11.2023 - 05.03.2024
Timing
04.03.2024 - 28.04.2024
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Matti Perälä
Student groups
-
AUTE22KADegree Programme in Automation Engineering, Full-time studies
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Location and time
Lecture material, Lecture demonstrations, Assignments, EPLAN software.
Teaching methods
Lectures, Demonstrations, Assignments.
Student workload
Contact teaching about 35 h. Self-learning and assignments about 70h.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Assessment methods and criteria
Assignment evaluation.
Assessment criteria, good (3)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system.
Assessment criteria, excellent (5)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system.
Assessment criteria, approved/failed
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system.
Qualifications
No previous studies are required.
Further information
The issues of automation technology are internationally similar.
Enrollment
13.11.2023 - 17.01.2024
Timing
29.01.2024 - 21.04.2024
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Matti Perälä
Student groups
-
MAUTE21
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Location and time
Lecture material, Lecture demonstrations, Assignments, EPLAN software.
Teaching methods
Lectures, Demonstrations, Assignments.
Student workload
Contact teaching about 35 h. Self-learning and assignments about 70h.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Assessment methods and criteria
Assignment evaluation.
Assessment criteria, good (3)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system.
Assessment criteria, excellent (5)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system.
Assessment criteria, approved/failed
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system.
Qualifications
No previous studies are required.
Further information
The issues of automation technology are internationally similar.
Enrollment
13.11.2023 - 17.01.2024
Timing
08.01.2024 - 25.02.2024
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Matti Perälä
Student groups
-
AUTE22SADegree Programme in Automation Engineering, Full-time studies
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Location and time
Lecture material, Lecture demonstrations, Assignments, EPLAN software.
Teaching methods
Lectures, Demonstrations, Assignments.
Student workload
Contact teaching about 35 h. Self-learning and assignments about 70h.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Assessment methods and criteria
Assignment evaluation.
Assessment criteria, good (3)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system.
Assessment criteria, excellent (5)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system.
Assessment criteria, approved/failed
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system.
Qualifications
No previous studies are required.
Further information
The issues of automation technology are internationally similar.
Enrollment
14.11.2022 - 14.11.2023
Timing
06.03.2023 - 30.04.2023
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Matti Perälä
Student groups
-
AUTE21KA
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Location and time
Lecture material, Lecture demonstrations, Assignments, EPLAN software.
Teaching methods
Lectures, Demonstrations, Assignments.
Student workload
Contact teaching about 35 h. Self-learning and assignments about 70h.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Assessment methods and criteria
Assignment evaluation.
Qualifications
No previous studies are required.
Further information
The issues of automation technology are internationally similar.
Enrollment
14.11.2022 - 15.01.2023
Timing
09.01.2023 - 26.02.2023
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Matti Perälä
Student groups
-
AUTE21SA
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Location and time
Lecture material, Lecture demonstrations, Assignments, EPLAN software.
Teaching methods
Lectures, Demonstrations, Assignments.
Student workload
Contact teaching about 35 h. Self-learning and assignments about 70h.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Assessment methods and criteria
Assignment evaluation.
Qualifications
No previous studies are required.
Further information
The issues of automation technology are internationally similar.
Enrollment
07.02.2022 - 20.03.2022
Timing
07.03.2022 - 08.05.2022
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Matti Perälä
Student groups
-
AUTE20KA
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Materials
Lecture material, Lecture demonstrations, Assignments, CADS programs.
Teaching methods
Lectures, Demonstrations, Assignment
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Assessment methods and criteria
Assignments
Qualifications
No previous studies are required.
Further information
The issues of automation technology are internationally similar.
Enrollment
03.12.2021 - 23.01.2022
Timing
10.01.2022 - 08.05.2022
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Matti Perälä
Student groups
-
AUTE20SA
Objective
Students will acquire the ability to interpret drawings in the fields of electrical and automation engineering. They will be competent in using CAD programmes for electrical and automation designing, and they will understand their features and areas where the programmes can be used. Upon completion of the course, students will possess the readiness they need to make simple, field-related drawings using CAD and to choose appropriate ways to present their work.
Content
Basic knowledge of drawings for electrical and automation engineering:
- Command of symbols and drawing techniques
- Ways to use computers in designing
- Practice in designing and drawing general, field-related diagrams
- Functions of the CAD system
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and understands to a satisfactory extent the basic concepts of EPLAN software , and is able to draw basic level main circuits, control circuits and panel layouts and apply them to basic level design of electrical and automation system .
Assessment criteria, good (3)
The student is familiar with the concepts of EPLAN software , and is able to draw different types of main circuits, control circuits and panel layouts and is able to apply them to to different types design of electrical and automation system .
Assessment criteria, excellent (5)
The student is familiar with the concepts and methods of EPLAN software , and is able to apply them well to a variety of different types design of electrical and automation system .
Qualifications
No previous studies are required.
Further information
The issues of automation technology are internationally similar.