Siirry suoraan sisältöön

Measuring Technology and InstrumentationLaajuus (3 op)

Tunnus: AE00CM65

Osaamistavoitteet

Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.

Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.

Sisältö

Mittaus:
Types of electricity and how to measure them ** Instruments for measuring electricity (multimeters, oscilloscopes, RLC meters, analyzers, installation testers, PC meters) ** Measurements (currency, voltage, resistence, frequency) ** Measurement accuracy and factors contributing to disturbances ** Troubleshooting systems ** Measurements in the lab.

Instru:
- Basic concepts of industrial instrumentation
- Principles of instrumentation and measurement technology
- Dimensioning adjustment valves
- Common industrial measurements
- Instrument installation and field engineering for industrial processes
- Instrumentation diagrams and documents
- Maintenance documents and how to make them

Esitietovaatimukset

Electrical engineering
Automation technology basic courses

Arviointikriteerit, tyydyttävä (1)

Mittaus:
The student knows the measuring methods of basic quantities and can carry out the multimeter and the oscilloscope safely using, the practical measurings. Furthermore, he knows let one to calibrate analogy based and digital based measure transmitters according to the instruction.
Instru:
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.

Arviointikriteerit, hyvä (3)

Mittaus:
In addition to the previous, the student knows the methods of the troubleshooting. Both one can know the modern measuring devices and their use. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Instru:
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. Furthermore, he knows when making the safe operation methods.

Arviointikriteerit, kiitettävä (5)

Mittaus:
The student can search for independently, it is not chosen and adapt, the measuring devices and applications to the different measurings of the automation. He can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them. Furthermore, he knows the standard placements of measuring devices.
Instru:
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. Furthermore, he can make changes in the PI schemes and in the PI circuit diagrams.
In addition to the matters well above, the student is familiar with the function of the control circuits which are used in the instrumentation and can dimension the different valves and pumps using dimensioning programs on the market.

Ilmoittautumisaika

13.11.2023 - 17.01.2024

Ajoitus

08.01.2024 - 28.04.2024

Laajuus

3 op

Virtuaaliosuus (op)

1 op

Yksikkö

SeAMK Bio- ja elintarviketekniikka sekä restonomi

Toimipiste

SeAMK Seinäjoki, Frami

Opetuskielet
  • Englanti
Tutkinto-ohjelma
  • Bachelor of Engineering, Automation Engineering
  • Insinööri (AMK), Bio- ja elintarviketekniikka
Opettaja
  • Ismo Tupamäki
Opiskelijaryhmät
  • AFE22
    Bachelor of Engineering, Agri-Food Engineering , full time studies
  • BIELI22
    Insinööri (AMK), Bio- ja elintarviketekniikka

Tavoitteet

Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.

Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.

Sisältö

Mittaus:
Types of electricity and how to measure them ** Instruments for measuring electricity (multimeters, oscilloscopes, RLC meters, analyzers, installation testers, PC meters) ** Measurements (currency, voltage, resistence, frequency) ** Measurement accuracy and factors contributing to disturbances ** Troubleshooting systems ** Measurements in the lab.

Instru:
- Basic concepts of industrial instrumentation
- Principles of instrumentation and measurement technology
- Dimensioning adjustment valves
- Common industrial measurements
- Instrument installation and field engineering for industrial processes
- Instrumentation diagrams and documents
- Maintenance documents and how to make them

Oppimateriaalit

To be announced at the beginning of each lesson by teacher.

Opetusmenetelmät

Lectures, exercises and laboratory works

Opiskelijan ajankäyttö ja kuormitus

Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h

Arviointiasteikko

1-5

Arviointikriteerit, tyydyttävä (1)

Mittaus:
The student knows the measuring methods of basic quantities and can carry out the multimeter and the oscilloscope safely using, the practical measurings. Furthermore, he knows let one to calibrate analogy based and digital based measure transmitters according to the instruction.
Instru:
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.

Arviointikriteerit, hyvä (3)

Mittaus:
In addition to the previous, the student knows the methods of the troubleshooting. Both one can know the modern measuring devices and their use. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Instru:
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. Furthermore, he knows when making the safe operation methods.

Arviointikriteerit, kiitettävä (5)

Mittaus:
The student can search for independently, it is not chosen and adapt, the measuring devices and applications to the different measurings of the automation. He can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them. Furthermore, he knows the standard placements of measuring devices.
Instru:
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. Furthermore, he can make changes in the PI schemes and in the PI circuit diagrams.
In addition to the matters well above, the student is familiar with the function of the control circuits which are used in the instrumentation and can dimension the different valves and pumps using dimensioning programs on the market.

Arviointimenetelmät ja arvioinnin perusteet

The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab

Esitietovaatimukset

Electrical engineering
Automation technology basic courses

Ilmoittautumisaika

13.11.2023 - 17.01.2024

Ajoitus

08.01.2024 - 25.02.2024

Laajuus

3 op

Virtuaaliosuus (op)

1 op

Yksikkö

SeAMK Automaatio- ja tietotekniikka

Toimipiste

SeAMK Seinäjoki, Frami

Opetuskielet
  • Englanti
Tutkinto-ohjelma
  • Bachelor of Engineering, Automation Engineering
Opettaja
  • Ismo Tupamäki
Opiskelijaryhmät
  • AE22
    Bachelor of Engineering, Automation Engineering

Tavoitteet

Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.

Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.

Sisältö

Mittaus:
Types of electricity and how to measure them ** Instruments for measuring electricity (multimeters, oscilloscopes, RLC meters, analyzers, installation testers, PC meters) ** Measurements (currency, voltage, resistence, frequency) ** Measurement accuracy and factors contributing to disturbances ** Troubleshooting systems ** Measurements in the lab.

Instru:
- Basic concepts of industrial instrumentation
- Principles of instrumentation and measurement technology
- Dimensioning adjustment valves
- Common industrial measurements
- Instrument installation and field engineering for industrial processes
- Instrumentation diagrams and documents
- Maintenance documents and how to make them

Oppimateriaalit

To be announced at the beginning of each lesson by teacher.

Opetusmenetelmät

Lectures, exercises and laboratory works

Opiskelijan ajankäyttö ja kuormitus

Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h

Arviointiasteikko

1-5

Arviointikriteerit, tyydyttävä (1)

Mittaus:
The student knows the measuring methods of basic quantities and can carry out the multimeter and the oscilloscope safely using, the practical measurings. Furthermore, he knows let one to calibrate analogy based and digital based measure transmitters according to the instruction.
Instru:
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.

Arviointikriteerit, hyvä (3)

Mittaus:
In addition to the previous, the student knows the methods of the troubleshooting. Both one can know the modern measuring devices and their use. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Instru:
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. Furthermore, he knows when making the safe operation methods.

Arviointikriteerit, kiitettävä (5)

Mittaus:
The student can search for independently, it is not chosen and adapt, the measuring devices and applications to the different measurings of the automation. He can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them. Furthermore, he knows the standard placements of measuring devices.
Instru:
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. Furthermore, he can make changes in the PI schemes and in the PI circuit diagrams.
In addition to the matters well above, the student is familiar with the function of the control circuits which are used in the instrumentation and can dimension the different valves and pumps using dimensioning programs on the market.

Arviointimenetelmät ja arvioinnin perusteet

The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab

Esitietovaatimukset

Electrical engineering
Automation technology basic courses

Ilmoittautumisaika

14.11.2022 - 15.01.2023

Ajoitus

09.01.2023 - 26.02.2023

Laajuus

3 op

Virtuaaliosuus (op)

1 op

T&K-osuus

1 op

Yksikkö

SeAMK Automaatio- ja tietotekniikka

Toimipiste

SeAMK Seinäjoki, Frami

Opetuskielet
  • Englanti
Tutkinto-ohjelma
  • Bachelor of Engineering, Automation Engineering
Opettaja
  • Ismo Tupamäki
Opiskelijaryhmät
  • AE21
    Bachelor of Engineering, Automation Engineering

Tavoitteet

Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.

Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.

Sisältö

Mittaus:
Types of electricity and how to measure them ** Instruments for measuring electricity (multimeters, oscilloscopes, RLC meters, analyzers, installation testers, PC meters) ** Measurements (currency, voltage, resistence, frequency) ** Measurement accuracy and factors contributing to disturbances ** Troubleshooting systems ** Measurements in the lab.

Instru:
- Basic concepts of industrial instrumentation
- Principles of instrumentation and measurement technology
- Dimensioning adjustment valves
- Common industrial measurements
- Instrument installation and field engineering for industrial processes
- Instrumentation diagrams and documents
- Maintenance documents and how to make them

Oppimateriaalit

To be announced at the beginning of each lesson by teacher.

Opetusmenetelmät

Lectures, exercises and laboratory works

Opiskelijan ajankäyttö ja kuormitus

Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h

Arviointiasteikko

1-5

Arviointikriteerit, tyydyttävä (1)

Mittaus:
The student knows the measuring methods of basic quantities and can carry out the multimeter and the oscilloscope safely using, the practical measurings. Furthermore, he knows let one to calibrate analogy based and digital based measure transmitters according to the instruction.
Instru:
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.

Arviointikriteerit, hyvä (3)

Mittaus:
In addition to the previous, the student knows the methods of the troubleshooting. Both one can know the modern measuring devices and their use. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Instru:
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. Furthermore, he knows when making the safe operation methods.

Arviointikriteerit, kiitettävä (5)

Mittaus:
The student can search for independently, it is not chosen and adapt, the measuring devices and applications to the different measurings of the automation. He can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them. Furthermore, he knows the standard placements of measuring devices.
Instru:
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. Furthermore, he can make changes in the PI schemes and in the PI circuit diagrams.
In addition to the matters well above, the student is familiar with the function of the control circuits which are used in the instrumentation and can dimension the different valves and pumps using dimensioning programs on the market.

Arviointimenetelmät ja arvioinnin perusteet

The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab

Esitietovaatimukset

Electrical engineering
Automation technology basic courses