Engineering drawing and CAD 1Laajuus (3 cr)
Code: KC00CB71
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Qualifications
No previous studies are required.
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Enrollment
22.04.2024 - 04.09.2024
Timing
26.08.2024 - 13.10.2024
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jarno Arkko
Student groups
-
KONE24ABachelor of Engineering, Mechanical Engineering
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus 1&2
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.
Enrollment
22.04.2024 - 04.09.2024
Timing
26.08.2024 - 13.10.2024
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Juho Yli-Suomu
Student groups
-
KONE24BBachelor of Engineering, Mechanical Engineering
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus 1&2
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.
Enrollment
17.04.2023 - 06.09.2023
Timing
18.09.2023 - 05.05.2024
Credits
3 op
Virtual proportion (cr)
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jarno Arkko
Student groups
-
MKONE23Bachelor of Engineering, Mechanical Engineering
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus 1&2
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.
Enrollment
17.04.2023 - 07.09.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jarno Arkko
Student groups
-
KONE23ABachelor of Engineering, Mechanical Engineering
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus 1&2
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.
Enrollment
17.04.2023 - 06.09.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jarno Arkko
Student groups
-
KONE23BBachelor of Engineering, Mechanical Engineering
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus 1&2
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.
Enrollment
16.04.2022 - 07.09.2022
Timing
29.08.2022 - 18.12.2022
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jarno Arkko
Student groups
-
KONE22B
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by hand and by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.
Enrollment
16.04.2022 - 07.09.2022
Timing
29.08.2022 - 18.12.2022
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jarno Arkko
Student groups
-
KONE22A
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by hand and by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.
Enrollment
16.04.2022 - 07.09.2022
Timing
15.08.2022 - 27.11.2022
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jarno Arkko
Student groups
-
MKONE22
Objective
Upon completion of the course, students will be competent in:
- interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams.
- utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed.
- using a three-dimensional, computer-aided designing (CAD) environment to create simple 3D models and standardised technical documents.
Content
- Concept of technical drawing
- Standardisation
- Projections
- Sectioning
- Dimensioning
- Assembly drawings
- 3D environments and simple models
Materials
- Hasari-Salonen: Teknillinen piirtäminen
- Pere: Koneenpiirustus
- Material provided during the lessons
Teaching methods
- Lectures
- Drafting and Modeling exercises by hand and by CAD
- Assignments
- Indendent study
Student workload
Will be announced at the beginning of the course
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 - 2): The student knows the basics of technical drawing and CAD. The student knows the standard symbols and the importance of planning. The student knows and understands to a basic concepts and methods of topics, and is able to apply them to usual problems.
Assessment criteria, good (3)
Good (3 -.4): The student is able to read technical drawings. The student is able to make CAD drawings related to the given assignments. The student is familiar with the concepts and methods of topics, and is able to apply them to different types of problems.
Assessment criteria, excellent (5)
Excellent (5): The student is interpreting and using the standardised methods of technical drawing including standard scales, symbols and diagrams. He is utilising methods of illustration for mechanical drawings and creating the required projections of an object to be designed. The student knows the knowledge objectives of the course well and can apply their knowledge in practice.
Assessment methods and criteria
Exam and exercises/assignments
Qualifications
No previous studies are required.