Measuring Technology and InstrumentationLaajuus (3 cr)
Code: AE00CM65
Objective
Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.
Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.
Content
- Basic concepts of industrial instrumentation
- Instrumentation diagrams and documents
- Principles of instrumentation and measurement technology
- Instrument installation and field engineering for industrial processes
- Maintenance documents and how to make them
- Measurements in the lab.
Qualifications
Electrical engineering
Automation technology basic courses
Assessment criteria, satisfactory (1)
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.
Assessment criteria, good (3)
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Assessment criteria, excellent (5)
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. The student can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them.
Enrollment
11.11.2024 - 19.02.2025
Timing
03.03.2025 - 27.04.2025
Credits
3 op
Teaching languages
- English
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AE23Bachelor of Engineering, Automation Engineering
Objective
Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.
Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.
Content
- Basic concepts of industrial instrumentation
- Instrumentation diagrams and documents
- Principles of instrumentation and measurement technology
- Instrument installation and field engineering for industrial processes
- Maintenance documents and how to make them
- Measurements in the lab.
Materials
To be announced at the beginning of each lesson by teacher.
Teaching methods
Lectures, exercises and laboratory works
Student workload
Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.
Assessment criteria, good (3)
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Assessment criteria, excellent (5)
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. The student can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them.
Assessment methods and criteria
The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab
Qualifications
Electrical engineering
Automation technology basic courses
Enrollment
11.11.2024 - 15.01.2025
Timing
07.01.2025 - 27.04.2025
Credits
3 op
Teaching languages
- English
Degree programmes
- Bachelor of Engineering, Automation Engineering
- Bachelor of Engineering, Food Processing and Biotechnology
Teachers
- Ismo Tupamäki
Student groups
-
AFE23Bachelor of Engineering, Agri-Food Engineering , full time studies
-
BIELI23Bachelor of Engineering, Food Processing and Biotechnology, Full-time studies
Objective
Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.
Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.
Content
- Basic concepts of industrial instrumentation
- Instrumentation diagrams and documents
- Principles of instrumentation and measurement technology
- Instrument installation and field engineering for industrial processes
- Maintenance documents and how to make them
- Measurements in the lab.
Materials
To be announced at the beginning of each lesson by teacher.
Teaching methods
Lectures, exercises and laboratory works
Student workload
Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.
Assessment criteria, good (3)
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Assessment criteria, excellent (5)
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. The student can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them.
Assessment methods and criteria
The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab
Qualifications
Electrical engineering
Automation technology basic courses
Enrollment
13.11.2023 - 17.01.2024
Timing
08.01.2024 - 25.02.2024
Credits
3 op
Virtual proportion (cr)
1 op
Teaching languages
- English
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AE22Bachelor of Engineering, Automation Engineering
Objective
Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.
Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.
Content
- Basic concepts of industrial instrumentation
- Instrumentation diagrams and documents
- Principles of instrumentation and measurement technology
- Instrument installation and field engineering for industrial processes
- Maintenance documents and how to make them
- Measurements in the lab.
Materials
To be announced at the beginning of each lesson by teacher.
Teaching methods
Lectures, exercises and laboratory works
Student workload
Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.
Assessment criteria, good (3)
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Assessment criteria, excellent (5)
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. The student can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them.
Assessment methods and criteria
The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab
Qualifications
Electrical engineering
Automation technology basic courses
Enrollment
13.11.2023 - 17.01.2024
Timing
08.01.2024 - 28.04.2024
Credits
3 op
Virtual proportion (cr)
1 op
Teaching languages
- English
Degree programmes
- Bachelor of Engineering, Automation Engineering
- Bachelor of Engineering, Food Processing and Biotechnology
Teachers
- Ismo Tupamäki
Student groups
-
AFE22Bachelor of Engineering, Agri-Food Engineering , full time studies
-
BIELI22
Objective
Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.
Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.
Content
- Basic concepts of industrial instrumentation
- Instrumentation diagrams and documents
- Principles of instrumentation and measurement technology
- Instrument installation and field engineering for industrial processes
- Maintenance documents and how to make them
- Measurements in the lab.
Materials
To be announced at the beginning of each lesson by teacher.
Teaching methods
Lectures, exercises and laboratory works
Student workload
Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.
Assessment criteria, good (3)
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Assessment criteria, excellent (5)
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. The student can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them.
Assessment methods and criteria
The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab
Qualifications
Electrical engineering
Automation technology basic courses
Enrollment
14.11.2022 - 15.01.2023
Timing
09.01.2023 - 26.02.2023
Credits
3 op
Virtual proportion (cr)
1 op
RD proportion (cr)
1 op
Teaching languages
- English
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AE21Bachelor of Engineering, Automation Engineering
Objective
Students will be competent in making basic measurements safely and correctly. They will be able to determine and locate possible faults by interpreting the measuring results. The student is able to tune the equipment to operate energy efficiently based on the measurement results obtained. They will take into account the impact of external interferences on measurement results. Students will learn about the characteristics of computer-based measuring devices and their possible uses in different applications.
Students will understand industrial processes, instrumentation diagram drawings and possess the eadiness they need to design industrial control and adjustment systems. Students will be competent in using the more common methods of measurement used in industry and be capable of planning, measuring and installing instruments for industrial processes. They will also be competent in selecting measurement and control instruments and plan the installation, purchase and startup of them.
Content
- Basic concepts of industrial instrumentation
- Instrumentation diagrams and documents
- Principles of instrumentation and measurement technology
- Instrument installation and field engineering for industrial processes
- Maintenance documents and how to make them
- Measurements in the lab.
Materials
To be announced at the beginning of each lesson by teacher.
Teaching methods
Lectures, exercises and laboratory works
Student workload
Total work load of the course: 60 h,
- of which scheduled studies 30 h
- of which self-access learning 30 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows the measuring methods of basic quantities and the selection criteria of the sensor types. He can place the sensors according to the instruction and can connect the sensors and regulating units. Furthermore, he can read the PI schemes and can locate the devices from the processes according to the code.
Assessment criteria, good (3)
In addition to the previous, the student knows the operating principles of modern regulating units and can locate using the information within reach of the fault and indicators. He can make the measurings of the automation according to the instruction using PC based measurement systems.
Assessment criteria, excellent (5)
The student can dimension independently and can choose the correct measuring devices and regulating units to the basic processes of the automation and can search for information about the special measurement equipment and can apply the knowledge got by it. The student can measure the condition of the measuring devices which are used in the processes and if necessary, command the tuning and calibration of them.
Assessment methods and criteria
The evaluation of the course is based on:
- Exam
- Exercises (homework)
- Group work in the lab
Qualifications
Electrical engineering
Automation technology basic courses