Physics Laboratory WorksLaajuus (3 cr)
Code: KC00AFY1020
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences, School of Engineering)
Enrollment
11.11.2024 - 19.02.2025
Timing
03.03.2025 - 27.04.2025
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Information Technology
Teachers
- Jouni Björkman
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Student groups
-
TITE23Bachelor of Engineering, Information Technology
Education groups
- Small group 1
- Small group 2
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics laboratory assignments (Seinäjoki University of Applied Sciences)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab. work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
11.11.2024 - 15.01.2025
Timing
07.01.2025 - 23.02.2025
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Jouni Björkman
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Student groups
-
AUTE23KADegree Programme in Automation Engineering, Full-time studies
Education groups
- Small group 1
- Small group 2
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences, School of Engineering)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
22.04.2024 - 15.01.2025
Timing
07.01.2025 - 23.02.2025
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Jouni Björkman
Student groups
-
AUTE23SADegree Programme in Automation Engineering, Full-time studies
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
13.11.2023 - 21.02.2024
Timing
04.03.2024 - 28.04.2024
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Information Technology
Teachers
- Jouni Björkman
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Student groups
-
TITE22
Education groups
- Small group 1
- Small group 2
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics laboratory assignments (Seinäjoki University of Applied Sciences)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab. work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
13.11.2023 - 17.01.2024
Timing
08.01.2024 - 25.02.2024
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Jouni Björkman
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Student groups
-
AUTE22KADegree Programme in Automation Engineering, Full-time studies
Education groups
- Small group 1
- Small group 2
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences, School of Engineering)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
13.11.2023 - 17.01.2024
Timing
08.01.2024 - 25.02.2024
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Pekka Sahimaa
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Student groups
-
AUTE22SADegree Programme in Automation Engineering, Full-time studies
Education groups
- Small group 1
- Small group 2
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
14.11.2022 - 22.02.2023
Timing
06.03.2023 - 30.04.2023
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Information Technology
Teachers
- Pekka Sahimaa
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Student groups
-
TITE21
Education groups
- Small group 1
- Small group 2
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics laboratory assignments (Seinäjoki University of Applied Sciences)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab. work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
14.11.2022 - 21.04.2023
Timing
06.03.2023 - 04.06.2023
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Jouni Björkman
Student groups
-
MAUTE21
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for laboratory assignments in physics (Seinäjoki University of Applied Sciences)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Reports and written examination based on the lab. work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
14.11.2022 - 15.01.2023
Timing
09.01.2023 - 26.02.2023
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Pekka Sahimaa
Student groups
-
AUTE21KA
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences, School of Engineering)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
16.04.2022 - 07.09.2022
Timing
29.08.2022 - 16.10.2022
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Jouni Björkman
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
Student groups
-
AUTE21SA
Education groups
- Pienryhmä 1
- Pienryhmä 2
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
03.12.2021 - 23.01.2022
Timing
10.01.2022 - 27.02.2022
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Jouni Björkman
Student groups
-
AUTE20KA
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences, School of Engineering)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills
Enrollment
03.12.2021 - 23.01.2022
Timing
10.01.2022 - 27.02.2022
Credits
3 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Jouni Björkman
Student groups
-
AUTE20SA
Objective
Upon completion of the course, student will
- be able to use the common tools and methods used in the research of technology
- be able to identify restrictions of the basic experimental research tools
- become familiar with the experimental data acquisition and are able to make controlled measurements
- be able to process results and to evaluate measurement methods and reliability of the results
- be able to analyze results with computer-assisted mathematical tools
- be able to form a scientific report based on the received measurements and their analysis by using a word processing program
- be able to build the relationship between theoretical knowledge and practical knowledge of physics
- be able to evaluate his/her skills and apply his/her expertise in the subsequent advanced studies and real problems at work
Content
Laboratory experiments from different areas of physics and engieering.
Materials
Instructions for exercises in physics (Seinäjoki University of Applied Sciences, School of Engineering)
Teaching methods
Laboratory work (minimum 90 % attendance required) and written reports
Employer connections
None
Student workload
Will be announced at the beginning of the course.
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Satisfactory (1 ... 2): The student is able to make basic measurements in accordance with working instructions and work safely in the laboratory. The student is able to deal with measurement results and to present the results graphically using computer-aided tools. The student is able to assess the reliability of the measurements according to instructions. The student is able to present a short technical report of the results of the measurements.
Assessment criteria, good (3)
Good (3 ... 4): The student is able to make different types of measurements in accordance with work instructions and work independently in the laboratory. The student is able to deal with the measurement results, and present the results graphically using computer-aided tools. The student is able to assess the reliability of measurements using different types of error estimation methods. The student is able to present the results in a logical and clear technical report.
Assessment criteria, excellent (5)
Excellent (5): The student works independently in the laboratory, and is able to make measurements based on instructions and develop the measurement methods. The student is able to evaluate the results using a wide range of computer-assisted tools, make reliable error estimates and draw conclusions from the results and error estimates. The student is able to present the results and conclusions in a logical and clear technical report.
Assessment methods and criteria
Approved reports and written examination based on the lab work.
Qualifications
Mechanics and Electrical and thermal physics or similar knowledge and skills