Material engineering laboratory workLaajuus (4 cr)
Code: 8C00CC69
Objective
Upon completion of the course, students will competent in:
- designing and manufacturing a product while considering the demands of the product and manufacturing.
- recognising requirements of standards for a product.
- independently carrying out research.
Content
- Designing, drawing, dimensioning and manufacturing a product
- Independent use of the machines in an engineering shop
- Standards
- Making samples and analysing them
Qualifications
No previous studies are required.
Assessment criteria, satisfactory (1)
Level 1-2: The student can use modern planning tools for the planning of the product and he is able to use the manual machines for making of parts.
Assessment criteria, good (3)
Level 3-4: The student knows the demands of standards to the product to be made and is able to design and is able to carry out it.
Assessment criteria, excellent (5)
Level 5: The student can adapt the properties of material to the manufacturing method, to the standards and the modern tools into use.
Materials
Lecturer's material
Enrollment
11.11.2024 - 15.01.2025
Timing
07.01.2025 - 23.02.2025
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jussi Yli-Hukkala
Student groups
-
KONE21
Objective
Upon completion of the course, students will competent in:
- designing and manufacturing a product while considering the demands of the product and manufacturing.
- recognising requirements of standards for a product.
- independently carrying out research.
Content
- Designing, drawing, dimensioning and manufacturing a product
- Independent use of the machines in an engineering shop
- Standards
- Making samples and analysing them
Materials
Lecturer's material
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Level 1-2: The student can use modern planning tools for the planning of the product and he is able to use the manual machines for making of parts.
Assessment criteria, good (3)
Level 3-4: The student knows the demands of standards to the product to be made and is able to design and is able to carry out it.
Assessment criteria, excellent (5)
Level 5: The student can adapt the properties of material to the manufacturing method, to the standards and the modern tools into use.
Qualifications
No previous studies are required.
Enrollment
22.04.2024 - 09.10.2024
Timing
02.12.2024 - 16.03.2025
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jussi Yli-Hukkala
- Janne Perälä
Student groups
-
MKONE21
Objective
Upon completion of the course, students will competent in:
- designing and manufacturing a product while considering the demands of the product and manufacturing.
- recognising requirements of standards for a product.
- independently carrying out research.
Content
- Designing, drawing, dimensioning and manufacturing a product
- Independent use of the machines in an engineering shop
- Standards
- Making samples and analysing them
Materials
Lecturer's material
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Level 1-2: The student can use modern planning tools for the planning of the product and he is able to use the manual machines for making of parts.
Assessment criteria, good (3)
Level 3-4: The student knows the demands of standards to the product to be made and is able to design and is able to carry out it.
Assessment criteria, excellent (5)
Level 5: The student can adapt the properties of material to the manufacturing method, to the standards and the modern tools into use.
Qualifications
No previous studies are required.
Enrollment
13.11.2023 - 15.01.2024
Timing
08.01.2024 - 25.02.2024
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jussi Yli-Hukkala
Student groups
-
KONE20
Objective
Upon completion of the course, students will competent in:
- designing and manufacturing a product while considering the demands of the product and manufacturing.
- recognising requirements of standards for a product.
- independently carrying out research.
Content
- Designing, drawing, dimensioning and manufacturing a product
- Independent use of the machines in an engineering shop
- Standards
- Making samples and analysing them
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Level 1-2: The student can use modern planning tools for the planning of the product and he is able to use the manual machines for making of parts.
Assessment criteria, good (3)
Level 3-4: The student knows the demands of standards to the product to be made and is able to design and is able to carry out it.
Assessment criteria, excellent (5)
Level 5: The student can adapt the properties of material to the manufacturing method, to the standards and the modern tools into use.
Qualifications
No previous studies are required.
Enrollment
17.04.2023 - 11.10.2023
Timing
30.10.2023 - 21.01.2024
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jussi Yli-Hukkala
Student groups
-
MKONE20
Objective
Upon completion of the course, students will competent in:
- designing and manufacturing a product while considering the demands of the product and manufacturing.
- recognising requirements of standards for a product.
- independently carrying out research.
Content
- Designing, drawing, dimensioning and manufacturing a product
- Independent use of the machines in an engineering shop
- Standards
- Making samples and analysing them
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Level 1-2: The student can use modern planning tools for the planning of the product and he is able to use the manual machines for making of parts.
Assessment criteria, good (3)
Level 3-4: The student knows the demands of standards to the product to be made and is able to design and is able to carry out it.
Assessment criteria, excellent (5)
Level 5: The student can adapt the properties of material to the manufacturing method, to the standards and the modern tools into use.
Qualifications
No previous studies are required.
Enrollment
14.11.2022 - 15.01.2023
Timing
09.01.2023 - 26.02.2023
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jussi Yli-Hukkala
- Janne Perälä
Student groups
-
KONE19
Objective
Upon completion of the course, students will competent in:
- designing and manufacturing a product while considering the demands of the product and manufacturing.
- recognising requirements of standards for a product.
- independently carrying out research.
Content
- Designing, drawing, dimensioning and manufacturing a product
- Independent use of the machines in an engineering shop
- Standards
- Making samples and analysing them
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Level 1-2: The student can use modern planning tools for the planning of the product and he is able to use the manual machines for making of parts.
Assessment criteria, good (3)
Level 3-4: The student knows the demands of standards to the product to be made and is able to design and is able to carry out it.
Assessment criteria, excellent (5)
Level 5: The student can adapt the properties of material to the manufacturing method, to the standards and the modern tools into use.
Qualifications
No previous studies are required.
Enrollment
14.11.2022 - 15.01.2023
Timing
09.01.2023 - 26.03.2023
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Mechanical Engineering
Teachers
- Jussi Yli-Hukkala
- Janne Perälä
Student groups
-
MKONE19
Objective
Upon completion of the course, students will competent in:
- designing and manufacturing a product while considering the demands of the product and manufacturing.
- recognising requirements of standards for a product.
- independently carrying out research.
Content
- Designing, drawing, dimensioning and manufacturing a product
- Independent use of the machines in an engineering shop
- Standards
- Making samples and analysing them
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
Level 1-2: The student can use modern planning tools for the planning of the product and he is able to use the manual machines for making of parts.
Assessment criteria, good (3)
Level 3-4: The student knows the demands of standards to the product to be made and is able to design and is able to carry out it.
Assessment criteria, excellent (5)
Level 5: The student can adapt the properties of material to the manufacturing method, to the standards and the modern tools into use.
Qualifications
No previous studies are required.