Machine Automation 1Laajuus (4 cr)
Code: KL25AB70200
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Qualifications
- Basics of automation
- Programmable logic controllers
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Materials
Lecturers' handouts, lecture demonstrations, assignments, product and programming manuals.
Further information
The issues of automation technology are internationally similar.
Enrollment
22.04.2024 - 04.09.2024
Timing
21.10.2024 - 18.12.2024
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AUTE23KADegree Programme in Automation Engineering, Full-time studies
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts ** Lecture demonstrations ** Assignments ** Product and programming manuals
Teaching methods
Lectures ** Demonstrations ** Assignments ** Group work
Student workload
Total work load of the course: 107 h,
- of which scheduled studies 52 h
- of which self-access learning 55 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Approved assignments and an exam
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.
Enrollment
22.04.2024 - 04.09.2024
Timing
26.08.2024 - 13.10.2024
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AUTE23SADegree Programme in Automation Engineering, Full-time studies
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts ** Lecture demonstrations ** Assignments ** Product and programming manuals
Teaching methods
Lectures ** Demonstrations ** Assignments ** Group work
Student workload
Total work load of the course: 107 h,
- of which scheduled studies 52 h
- of which self-access learning 55 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Approved assignments and an exam
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.
Enrollment
17.04.2023 - 11.10.2023
Timing
23.10.2023 - 17.12.2023
Credits
4 op
Virtual proportion (cr)
1 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AUTE22KADegree Programme in Automation Engineering, Full-time studies
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts, lecture demonstrations, assignments, product and programming manuals.
Teaching methods
Lectures, demonstrations, assignments with real PLC programs.
Student workload
Total work load of the course: 80 h,
- of which scheduled studies 40 h
- of which self-access learning 40 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Exercises and device exam using PLC software.
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.
Enrollment
31.08.2023 - 17.09.2023
Timing
28.08.2023 - 15.10.2023
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AUTE22SADegree Programme in Automation Engineering, Full-time studies
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts, lecture demonstrations, assignments, product and programming manuals.
Teaching methods
Lectures, demonstrations, assignments with real PLC programs.
Student workload
Total work load of the course: 80 h,
- of which scheduled studies 40 h
- of which self-access learning 40 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Exercises and device exam using PLC software.
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.
Enrollment
16.04.2022 - 12.10.2022
Timing
24.10.2022 - 18.12.2022
Credits
4 op
Virtual proportion (cr)
1 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AUTE21KA
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts, lecture demonstrations, assignments, product and programming manuals
Teaching methods
Lectures, examples, programming exercises with practical software.
Student workload
Total work load of the course: 80 h,
- of which scheduled studies 40 h
- of which self-access learning 40 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Exercises and device exam using PLC software
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.
Enrollment
16.04.2022 - 12.10.2022
Timing
24.10.2022 - 18.12.2022
Credits
4 op
Virtual proportion (cr)
1 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AUTE21SA
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts, lecture demonstrations, assignments, product and programming manuals.
Teaching methods
Lectures, demonstrations, assignments with real PLC programs.
Student workload
Total work load of the course: 80 h,
- of which scheduled studies 40 h
- of which self-access learning 40 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Exercises and device exam using PLC software.
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.
Enrollment
16.04.2022 - 12.10.2022
Timing
24.10.2022 - 18.12.2022
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
MAUTE21
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts, lecture demonstrations, assignments, product and programming manuals
Teaching methods
Lectures, examples, programming exercises with practical software.
Student workload
Total work load of the course: 80 h,
- of which scheduled studies 40 h
- of which self-access learning 40 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Exercises and device exam using PLC software
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.
Enrollment
03.12.2021 - 23.01.2022
Timing
10.01.2022 - 27.02.2022
Credits
4 op
Teaching languages
- Finnish
Degree programmes
- Bachelor of Engineering, Automation Engineering
Teachers
- Ismo Tupamäki
Student groups
-
AUTE20KA
Objective
Students will be competent in analysing the structures and functions of the control systems used in machine automation systems. They will be able to utilise the IEC standardised programming tools and to develop reliable and energy efficient
control software and a user interface for a materials handling device.
Content
- Structural programming (sequence)
- Function block programming
- Standard functions (timers, calculators, comparisons and other commonly used functions)
- Analogue signals
- Recipes
- User interfaces.
Students will engage in hands-on learning of pneumatically and electrically controlled actuators for automation systems using programmable logic and touch screens.
Materials
Lecturers' handouts ** Lecture demonstrations ** Assignments ** Product and programming manuals
Teaching methods
Lectures ** Demonstrations ** Assignments ** Group work
Student workload
Total work load of the course: 100 h,
- of which scheduled studies 42 h
- of which self-access learning 38 h
Evaluation scale
1-5
Assessment criteria, satisfactory (1)
The student knows and controls the grounds for the use and programming of the IEC standard programming tool in the one to be been satisfied with numbers. He can make using models which are ready for the simple automation equipment of the operating and safe logic program.
Assessment criteria, good (3)
The student knows well the basic concepts which are related to the machine automation and the standard programming methods. He is able to adapt and is able to use ready function blocks in the solving of problems of different types. The student can test the operation of the automation program and can search it for the simulation using, the possible mistakes which endanger safety.
Assessment criteria, excellent (5)
The student can create independently and can debug a clear structured standard logic program. He can make, can test and can adapt own function blocks to different applications without forgetting safety.
The student understands the function of the programmable devices which are used in the machine automation and can locate and can repair the different diagnostics tools of the problem section and simulation using.
Assessment methods and criteria
Approved assignments and an exam
Qualifications
- Basics of automation
- Programmable logic controllers
Further information
The issues of automation technology are internationally similar.